MK CHEM MK90 TD

MINHKHANG CHEMICAL TRADING JOINT STOCK COMPANY

1/69/313 DANANG road, NGOQUYEN district, HAIPHONG city VIeTNAM s..r.

TEL: 0084318 825212 FAX: 0084313593936

Mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Website : www.mkchemvn.com

Material Safety Data Sheet 

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

Product Name: Filler masterbatch Calcium carbonat coated

 FILLER MASTERBATCH CALCIUM CARBONATE COATED

H.S. CODE: 3206.19.10

 1. GRADE : MK90 TD

FOR PP WOVEN BAG

Origin: Viet Nam

Recommended Use: Plastic

Supplier: Minhkhang chemical trading jsc.,

Street Address: 1/69/313 Danang str, Ngoquyen Dist, Haiphong City, Vietnam

Telephone Number: 0318825212/0919661111

2. HAZARDS IDENTIFICATION

NON-HAZARDOUS SUBSTANCE.

NON-DANGEROUS GOODS.

Poisons Schedule: None allocated

3. COMPOSITION/INFORMATION ON INGREDIENTS

Components CAS Number Proportion Risk Phrases

Powder CACO3 = 75 % to 79 %

Polypropylene and Polyethylene = 22 % to 25 %

Titanium Dioxide Count < 80%

4. FIRST AID MEASURES

Inhalation:

Remove victim from area of exposure - avoid becoming a casualty. Seek medical advice if effects persist.

Skin Contact:

If skin contact occurs, remove contaminated clothing and wash skin with running water. If irritation occurs

seek medical advice.

Eye Contact:

If in eyes, wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek

medical advice.

Ingestion:

Although swallowing is unlikely to cause problems, it is a sensible precaution to rinse the mouth with water

and give a glass of water to drink.

Medical attention and special treatment:

Treat symptomatically.

5. FIRE FIGHTING MEASURES

Hazards from combustion products:

Combustible solid.

Suitable Extinguishing Media:

Fine water spray, normal foam, dry agent (carbon dioxide, dry chemical powder).

6. ACCIDENTAL RELEASE MEASURES

Emergency procedures: 

If contamination of sewers or waterways has occurred advise local emergency services.

Methods and materials for containment and clean up:

Wear protective equipment to prevent skin and eye contact and breathing in dust. Work up wind or increase

ventilation.

Cover with damp absorbent (inert material, sand or soil). Sweep or vacuum up, but avoid generating dust.

Collect and

seal in properly labelled containers or drums for disposal.

7. HANDLING AND STORAGE

Conditions for safe storage:

Store in a cool, dry, well ventilated place and out of direct sunlight. Keep containers closed when not in use -

check

regularly for spills.

Precautions for safe handling:

Avoid skin and eye contact and breathing in dust. In common with many organic chemicals, may form

flammable dust

clouds in air. For precautions necessary refer to Safety Data Sheet "Dust Explosion Hazards".

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Starch: 8hr TWA = 10 mg/m3

As published by the National Occupational Health and Safety Commission as per Vietnam

TWA - The time-weighted average airborne concentration over an eight-hour working day, for a five-day

working week

over an entire working life.

These Exposure Standards are guides to be used in the control of occupational health hazards. All atmospheric

contamination should be kept to as low a level as is workable. These exposure standards should not be used as

fine

dividing lines between safe and dangerous concentrations of chemicals. They are not a measure of relative

toxicity.

Engineering controls:

Ensure ventilation is adequate to maintain air concentrations below Exposure Standards. Avoid generating and

breathing

in dusts. Use with local exhaust ventilation or while wearing dust mask. Keep containers closed when not in

use.

Personal Protective Equipment:

The selection of PPE is dependant on a detailed risk assessment. The risk assessment should consider the work

situation, the physical form of the chemical, the handling methods, and environmental factors.

Orica Personal Protection Guide No. 1, 1998: E - OVERALLS, SAFETY SHOES, SAFETY GLASSES,

GLOVES, DUST MASK.

Wear overalls, safety glasses and impervious gloves. Avoid generating and inhaling dusts. If excessive dust

exists, wear

dust mask/respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716. Always wash hands before

smoking,

eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage

or re-use.

9. PHYSICAL AND CHEMICAL PROPERTIES

Physical state: Compound

Colour: White

Odour: Neutral

Solubility: Insoluble in water.

Specific Gravity: Not available

Relative Vapour Density (air=1): Not available

Vapour Pressure (20 °C): Not available

Flash Point (°C): 400

Flammability Limits (%):As compound . 1,9 g/m3 

Autoignition Temperature (°C): Not available

Melting Point/Range (°C): 120

Decomposition Point (°C): >250

pH: 4-7 (30% suspension)

10. STABILITY AND REACTIVITY

Chemical stability: Stable under normal conditions of use.

Conditions to avoid: Avoid dust generation.

Incompatible materials: None known.

Hazardous decomposition Oxides of carbon

products:.

Hazardous reactions: None known.

11. TOXICOLOGICAL INFORMATION

No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the

product

label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:

Ingestion: No adverse effects expected

Eye contact: May be an eye irritant. Exposure to the dust may cause discomfort due to particulate nature. May

cause physical irritation to the eyes.

Skin contact: Contact with skin may result in irritation. Can cause skin to dry out.

Inhalation: Breathing in dust may result in respiratory irritation

Long Term Effects:

No chronic effects reported.

Toxicological Data: No LD50 data available for the product.

12. ECOLOGICAL INFORMATION

Good

13. DISPOSAL CONSIDERATIONS

Disposal methods:

Refer to Waste Management Authority. Normally suitable for disposal at approved land waste site. Normally

suitable for

incineration by an approved agent.

14. TRANSPORT INFORMATION

Road and Rail Transport

Not classified as Dangerous Goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for

transport by

Road and Rail; NON-DANGEROUS GOODS.

Avoid contaminating waterways.

Marine Transport

Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code

(IMDG Code) for

transport by sea; NON-DANGEROUS GOODS.

Air Transport

Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA)

Dangerous Goods

Regulations for transport by air; NON-DANGEROUS GOODS.

The product does not contain SEBASIS ACID

15. REGULATORY INFORMATION

Classification: Based on available information, not classified as hazardous according to criteria of Safe Work

Australia; NON-HAZARDOUS SUBSTANCE. 

None allocated.

This material is listed on the Australian Inventory of Chemical Substances (AICS).

16. OTHER INFORMATION

Reason(s) for Issue: 

Product Name: Filler masterbatch Calcium carbonat compound Issued: 26/022022